Selectarc Co6
Uitstekende laseigenschappen en zelflossende slak. Het lasmetaal kan worden bewerkt met wolfraam snijgereedschappen en door slijpen. De hardheid van de neersmelt wordt 16% bij 300 °C en ongeveer 30% bij 600 °C. De neersmelt is hittebestendig tot 900 °C.
Not required
43-45 HRc, Stellite 6 legering met uitstekende eigenschappen tegen slijtage, thermische schokken en corrosie in combinatie met hoge temperaturen.
43-45 HRc, Stellite 6 legering met uitstekende eigenschappen tegen slijtage, thermische schokken en corrosie in combinatie met hoge temperaturen.
Uitstekende laseigenschappen en zelflossende slak. Het lasmetaal kan worden bewerkt met wolfraam snijgereedschappen en door slijpen. De hardheid van de neersmelt wordt 16% bij 300 °C en ongeveer 30% bij 600 °C. De neersmelt is hittebestendig tot 900 °C.
Steam-valves, High temperature liquid pumps, Hot cutting tools, Exhaust valves, Pumps, Plastic recycling etc.
| Heat Treatment |
RP0,2 (MPa) |
Rm (MPa) |
A5 (%) |
Hardness |
|---|---|---|---|---|
| As Welded | 42 HRc |
Outstanding alloy against abrasion, thermo-shock and corrosion combined with high temperatures. The weld deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degrees 16% at 300°C and about 30% at 600°C. The weld deposit is high heat resistant up to 900°C. DUR 6 offers a low coefficient of friction of 0.12 and exceptional resistance to galling. It has cavitation-erosion resistance ten times that of 304 stainless steel, DUR 6 can be used to protect bearing surfaces in non-lubricating conditions due to its resistance to metal-to-metal wear.
Not required
Steam-valves, high temperature liquid pumps, hot cutting tools, exhaust valves.
Steam-valves, high temperature liquid pumps, hot cutting tools, exhaust valves.
Outstanding alloy against abrasion, thermo-shock and corrosion combined with high temperatures. The weld deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degrees 16% at 300°C and about 30% at 600°C. The weld deposit is high heat resistant up to 900°C. DUR 6 offers a low coefficient of friction of 0.12 and exceptional resistance to galling. It has cavitation-erosion resistance ten times that of 304 stainless steel, DUR 6 can be used to protect bearing surfaces in non-lubricating conditions due to its resistance to metal-to-metal wear.
Stellite 6 alloy for, Steam-valves, high temperature liquid pumps, hot cutting tools, exhaust valves and seats
| Heat Treatment |
RP0,2 (MPa) |
Rm (MPa) |
A5 (%) |
Hardness |
|---|---|---|---|---|
| As Welded | 40 HRc |