SP CuSn6 | Certilas: The filler metal specialist

Retour

spécifications du produit
conditionnement
demander un devis

Type

Metal spray wires

Excellent sliding properties.

Not required

classification

EN ISO

14919: 4.4

W.Nr.

2.1022

Applications

SP CuSn6 for coatings that require good sliding properties.

Type

Metal spray wires

Applications

SP CuSn6 for coatings that require good sliding properties.

Propriétés

Excellent sliding properties.

Classification

EN ISO

14919: 4.4

W.Nr.

2.1022

Convient pour

Bronze metal spray wire for coatings that require good sliding properties.

Positions de soudage

Etuvage

Not required

Analyse

Si	Mn	Cr	Ti	Fe	B	Cu	Zn	Sn	Al	Mg	C	S	P	Pb	Ni	Mo	Nb	W	As
						Rem.		7					0.2

Propriétés mécaniques

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				80 HB

fiche produit

déclaration de performance

déclaration de conformité

FDS

fiche produit

demander un devis

FDS

Certilas

Certilas

Avertissement

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.