SP ZnAl 85/15 | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

Solid metal spray wire

High corrosion resistance

Not required

classification

EN ISO

14919: 2.3 (ZnAl)

Toepassingen

In case high corrosion resistance is required

Type

Solid metal spray wire

Toepassingen

In case high corrosion resistance is required

Eigenschappen

High corrosion resistance

Classificatie

EN ISO

14919: 2.3 (ZnAl)

Geschikt voor

Metal spray wire for so called Scooping in case high corrosion resistance is required. Bridges, outdoor steel furniture, monopiles, wind mills.

Lasposities

Herdrogen

Not required

Analyse

C	Si	Mn	P	S	Cr	Ni	Mo	Nb	Ti	Fe	W	B	Cu	Zn	Pb	Sn	Al	Mg	As
														85			15

productblad

prestatieverklaring

conformiteitsverklaring

productblad

vraag offerte

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.