Type
High-alloyed tubular wire on a C-Cr-B carbide basis for extreme hard deposits on parts subject to strong mineral abrasion.

Extreme wear resistance even at higher temperatures. The deposit gives already a High hardness in the first layer. A buffer layer is recommended in case of sensible base material or old layers. Weldable without protective gas.Corresponding electrode: CEWELD® Dur 62 S

140°C / 24 hr

classification
EN ISO
14700: T Fe15
Toepassingen

Rebuilding and or protecting wear parts against extreme abrasion with low impact.

Type
High-alloyed tubular wire on a C-Cr-B carbide basis for extreme hard deposits on parts subject to strong mineral abrasion.
Toepassingen

Rebuilding and or protecting wear parts against extreme abrasion with low impact.

Eigenschappen

Extreme wear resistance even at higher temperatures. The deposit gives already a High hardness in the first layer. A buffer layer is recommended in case of sensible base material or old layers. Weldable without protective gas.Corresponding electrode: CEWELD® Dur 62 S

Classificatie
EN ISO
14700: T Fe15
Geschikt voor

61-64 HRc hardfacing alloy, Cement, Mineral mixing, hammers, coke wear plates etc.

Lasposities
PA
PB
Herdrogen

140°C / 24 hr

Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
5 1 0.2 30 0.5
Mechanische waarden
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 62 HRc
productblad
conformiteitsverklaring
VIB
productblad
vraag offerte
VIB