NiCro 72M | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

Nickel-Chromium solid MIG wire

Weld metal has good resistance against high temperature oxidation, carburization, sulfidation and to reducing-sulfurizing and metal dusting environments

Not required

classification

AWS

A 5.14: ERNiCr-7

EN ISO

18274: S Ni 6073(NiCr38AlNbTi)

Toepassingen

CEWELD NiCro 72M is used for the overlay cladding of ferrous materials used in high temperature applications, and the welding of nickel-chromium-iron alloy to itself, and to steels.
Also for welding IN657 and INCO clad 671/800H.

Type

Nickel-Chromium solid MIG wire

Toepassingen

CEWELD NiCro 72M is used for the overlay cladding of ferrous materials used in high temperature applications, and the welding of nickel-chromium-iron alloy to itself, and to steels.
Also for welding IN657 and INCO clad 671/800H.

Eigenschappen

Weld metal has good resistance against high temperature oxidation, carburization, sulfidation and to reducing-sulfurizing and metal dusting environments

Classificatie

AWS

A 5.14: ERNiCr-7

EN ISO

18274: S Ni 6073(NiCr38AlNbTi)

F-nr

43

FM

6

Geschikt voor

ASTM B163, B166, B167, B168 with UNS N06690, IN657, Incoloy 671/800H

Lasposities

Herdrogen

Not required

Gas acc. EN ISO 14175

I1

Analyse

C	Si	Mn	Cr	Ni	Mo	Nb	Ti	Fe	W	Co	Cu	Al	V	P	S	Nb+Ta
0.02	0.2	0.3	37	65		0.8	0.6					1				0.7

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded		690	30	HRc

productblad

prestatieverklaring

conformiteitsverklaring

VIB

productblad

VIB

NiCro 72M welding wire

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.