AA SS 6356 | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

Flux-cored welding wire for rebuilding and hardfacing.

classification

EN ISO

14700: T Z Fe5

Toepassingen

CEWELD® AA SS 6356 is a flux-cored wire electrode for hardfacing tools that needs to be machined afterwards.

Such as : Die casting molds, edges, and cutting tools ….

Type

Flux-cored welding wire for rebuilding and hardfacing.

Toepassingen

CEWELD® AA SS 6356 is a flux-cored wire electrode for hardfacing tools that needs to be machined afterwards.

Such as : Die casting molds, edges, and cutting tools ….

Eigenschappen

The weld metal deposited by CEWELD® AA SS 6356 consists of a martensite-hardening alloy that can be drilled, turned, milled, and filed in the welded condition. Heat treatment can significantly increase the hardness of the weld metal, and nitriding can increase it further.

As welded: ~ 34 HRc

480°C/3h:~53 HRc

Nitriding: ~ 63 HRc

Classificatie

EN ISO

14700: T Z Fe5

Geschikt voor

Tool steel

Lasposities

Herdrogen

Not required

Gas acc. EN ISO 14175

M21

Analyse

C	Si	Mn	Cr	Ni	Mo	Nb	Ti	V	N	Fe	W	B	Co	Cu	Al
0.03	1	0.4		18	4					Rem.			12

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				34 HRc

productblad

prestatieverklaring

conformiteitsverklaring

productblad

Certilas

Certilas

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.