Type
Flux cored CrNiMo alloyed welding wire for rebuilding and cladding
classification
EN ISO
14700: T Fe7
Toepassingen

CEWELD® AA 310 NiMo  is mainly used for roll coatings against hot wear, preferably in steelworks. Continuous casting rolls, steam turbines, valve seats.

Type
Flux cored CrNiMo alloyed welding wire for rebuilding and cladding
Toepassingen

CEWELD® AA 310 NiMo  is mainly used for roll coatings against hot wear, preferably in steelworks. Continuous casting rolls, steam turbines, valve seats.

Eigenschappen

CEWELD® AA 310 NiMo produces corrosion-resistant, medium-hardness 13 % Cr weld metal that does not fatigue, even at high temperatures.
Heating the high-chromium martensitic alloy allows the hardness to be adjusted precisely within the range of  43–45 HRc.
The interpass temperature should not exceed 450°C. The weld metal is tough and can be machined.

Classificatie
EN ISO
14700: T Fe7
Geschikt voor

12%Cr - 2%Ni - 1,0%Mo Steel 

 For roll coatings against hot wear, preferably in steelworks. Continuous casting rolls

Lasposities
PA
PB
PC
Herdrogen
Not required
Gas acc. EN ISO 14175
M21
Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
0.12 0.5 1 12 2 1 0.2 0.2
Mechanische waarden
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 44 HRc
productblad
conformiteitsverklaring
productblad
vraag offerte