- spécifications du produit
- conditionnement
- demander un devis
Stainless steel alloy for joining and cladding 17% Chromium alloys and cladding components where heat and corrosion resistance simmilar to AISI 304 is required.The weld deposit can sustain working temperatures up to 450°C and will offer a high hardness and wear resistance.
Not required
Hardfacing shafts from stainless steel parts, molt repairs, rebuilding pump parts, thermal spray etc.
Suitable for plating and joining equal and similar ferritic Cr-steels and cast steels.
Proper weldings are subject to the recommended heat treatment. This welding wire is specially suitable for sealing surfaces on water-, steamand gas-valves, especially for sulphuric gases.
The deposit is resistant to seawater, thin acids and scale resistant in air and oxidizing gases up to 950°C.
The weld deposit can be tempered.
Hardfacing shafts from stainless steel parts, molt repairs, rebuilding pump parts, thermal spray etc.
Suitable for plating and joining equal and similar ferritic Cr-steels and cast steels.
Proper weldings are subject to the recommended heat treatment. This welding wire is specially suitable for sealing surfaces on water-, steamand gas-valves, especially for sulphuric gases.
The deposit is resistant to seawater, thin acids and scale resistant in air and oxidizing gases up to 950°C.
The weld deposit can be tempered.
Stainless steel alloy for joining and cladding 17% Chromium alloys and cladding components where heat and corrosion resistance simmilar to AISI 304 is required.The weld deposit can sustain working temperatures up to 450°C and will offer a high hardness and wear resistance.
1.4122 (G)X35CrMo17, Cast steels
| Heat Treatment |
RP0,2 (MPa) |
Rm (MPa) |
A5 (%) |
Hardness |
|---|---|---|---|---|
| As Welded | >300 | >450 | >20 | 45 HRc |
