Type
Flux cored CrNiMo alloyed welding wire for rebuilding and cladding
classification
EN ISO
14700: T Fe7
Applications

CEWELD® AA 310 NiMo  is mainly used for roll coatings against hot wear, preferably in steelworks. Continuous casting rolls, steam turbines, valve seats.

Type
Flux cored CrNiMo alloyed welding wire for rebuilding and cladding
Applications

CEWELD® AA 310 NiMo  is mainly used for roll coatings against hot wear, preferably in steelworks. Continuous casting rolls, steam turbines, valve seats.

Propriétés

CEWELD® AA 310 NiMo produces corrosion-resistant, medium-hardness 13 % Cr weld metal that does not fatigue, even at high temperatures.
Heating the high-chromium martensitic alloy allows the hardness to be adjusted precisely within the range of  43–45 HRc.
The interpass temperature should not exceed 450°C. The weld metal is tough and can be machined.

Classification
EN ISO
14700: T Fe7
Convient pour

12%Cr - 2%Ni - 1,0%Mo Steel 

 For roll coatings against hot wear, preferably in steelworks. Continuous casting rolls

Positions de soudage
PA
PB
PC
Etuvage
Not required
Gas acc. EN ISO 14175
M21
Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
0.12 0.5 1 12 2 1 0.2 0.2
Propriétés mécaniques
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 44 HRc
fiche produit
déclaration de conformité
fiche produit
demander un devis