Selectarc Cu110

Marque
Selectarc
Ceweld product
Type
Copper based electrode developed for joining and cladding.

Ductile welding deposit with high conductivity and corrosion resistance. The weld deposit is free from porosity and offers similar strength as most commercial copper grades. Thicker sections than 5 mm should be preheated up to approximately 500 °C.

140°C / 2 hr

classification
AWS
A 5.6: E Cu
EN ISO
17777: E Cu 1893
W.Nr.
~2.1363
Applications

CEWELD E CuMn is suitable for welding and overlaying Copper and Copper Alloys, Cast Iron and steel.

Type
Copper based electrode developed for joining and cladding.
Applications

CEWELD E CuMn is suitable for welding and overlaying Copper and Copper Alloys, Cast Iron and steel.

Propriétés

Ductile welding deposit with high conductivity and corrosion resistance. The weld deposit is free from porosity and offers similar strength as most commercial copper grades. Thicker sections than 5 mm should be preheated up to approximately 500 °C.

Classification
AWS
A 5.6: E Cu
EN ISO
17777: E Cu 1893
F-nr
31
W.Nr.
~2.1363
Convient pour

Cladding steel, Grey cast iron, Copper, Copper Alloys and dissimilar welding. 

Mat.n: 2.0040, 2.0060, 2.0070, 2.0076, 2.0080, 2.0090, 20100, 2.0110, 2.0150, 2.0170,

UNS: C10100, C11000, C10300, C11020, C12000, C12200, C12250, C14200, 

CW008A, CW021A, CW023A, CR024A 

Cu-OF, E Cu, Cu-SE, Cu-SW, CU-SA, Cu-F, Cu-SF, Cu-D, Cu-DLP, Cu-DHP

 

Positions de soudage
PA
PB
PC
Etuvage

140°C / 2 hr

Analyse
Si Mn P Ti Fe Zn Pb Sn Al Cu+Ag Ni+Co S Cu As
0.25 2.5 0.08 0.1 0.7 0.2 96
Propriétés mécaniques
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 205 35 100 HB
Product sheet
product sheet
Ask quotation