SP CuSn6 | Certilas: The filler metal specialist

Zurück

Produktspezifikationen
Verpackung
Bitte um Angebot

Type

Metal spray wires

Excellent sliding properties.

Not required

classification

EN ISO

14919: 4.4

W.Nr.

2.1022

Anwendungen

SP CuSn6 for coatings that require good sliding properties.

Type

Metal spray wires

Anwendungen

SP CuSn6 for coatings that require good sliding properties.

Eigenschaften

Excellent sliding properties.

Klassifikation

EN ISO

14919: 4.4

W.Nr.

2.1022

Geeignet für

Bronze metal spray wire for coatings that require good sliding properties.

Schweißpositionen

Rücktrocknung

Not required

Analyse

Si	Mn	Cr	Ti	Fe	B	Cu	Zn	Sn	Al	Mg	C	S	P	Pb	Ni	Mo	Nb	W	As
						Rem.		7					0.2

Mechanische Gütewerte

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				80 HB

Kennblatt

Leistungserklärung

Konformitätserklärung

SDB

Kennblatt

Bitte um Angebot

SDB

Certilas

Certilas

Haftungsausschluss

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.