Type
High-alloyed tubular wire on a C-Cr-Nb-B carbide basis for extreme hard deposits on parts subject to strong mineral abrasion.

Extreme wear resistance even at higher temperatures. The deposit gives already a High hardness in the first layer. A buffer layer is recommended in case of sensible base material or old layers. Weldable without protective gas

140°C / 24 hr

classification
EN ISO
14700: T Fe15
DIN
8555: MF 10-GF-65-G
Anwendungen

Rebuilding and or protecting wear parts that faces extreme abrasion and medium to low impact.

Type
High-alloyed tubular wire on a C-Cr-Nb-B carbide basis for extreme hard deposits on parts subject to strong mineral abrasion.
Anwendungen

Rebuilding and or protecting wear parts that faces extreme abrasion and medium to low impact.

Eigenschaften

Extreme wear resistance even at higher temperatures. The deposit gives already a High hardness in the first layer. A buffer layer is recommended in case of sensible base material or old layers. Weldable without protective gas

Klassifikation
EN ISO
14700: T Fe15
DIN
8555: MF 10-GF-65-G
Geeignet für

63-67 HRc hardfacing alloy ,Fan blades, Bucket lips, Mining, Cement, Mineral hammers, coke wear plates etc.

Schweißpositionen
PA
PB
Rücktrocknung

140°C / 24 hr

Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
4.7 1.7 0.2 22 7 1
Mechanische Gütewerte
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 63 HRc
Kennblatt
Konformitätserklärung
SDB
Kennblatt
Bitte um Angebot
SDB