NILO Alloy 36 | Certilas: The filler metal specialist

Zurück

Produktspezifikationen
Verpackung
Bitte um Angebot

Type

Filler metal with extreme low thermal expansion.

NILO Alloy 36 is used for welding NILO Alloy 36, NILO Alloy 36 is formulated to have low thermal expansion characteristics similar to NILO Alloy 36, while providing freedom from solidification and reheat cracking. NILO Alloy 36 is available for Tig, Mig and SAW process.

Not required

classification

W.Nr.

1.3912, ~1.3990

Anwendungen

Welding applications that require the lowest thermal expansion to avoid solidification and reheat cracking.

Type

Filler metal with extreme low thermal expansion.

Anwendungen

Welding applications that require the lowest thermal expansion to avoid solidification and reheat cracking.

Eigenschaften

NILO Alloy 36 is used for welding NILO Alloy 36, NILO Alloy 36 is formulated to have low thermal expansion characteristics similar to NILO Alloy 36, while providing freedom from solidification and reheat cracking. NILO Alloy 36 is available for Tig, Mig and SAW process.

Klassifikation

W.Nr.

1.3912, ~1.3990

Geeignet für

NILO Alloy 36, (Invar 36) (K93600) (W.Nr.1.3912, 1.3990) (Nilo 36)(Ni36)(FeNi36)(Alloy 36)(36FN)(INGカウタヌLF)(4J36)(SimondslnVar136)(Vacodil 36)(Nicloy 36)(36NiCKel)(36Н)(36Н-Вц)(ЭИ36)(HS-36)(36Ni. InVar Ⅰ).

Schweißpositionen

Rücktrocknung

Not required

Gas acc. EN ISO 14175

I1, I3

Analyse

C	Mn	Ni	Fe	Nb	Ti	Si
0.25	0.5	36	Rem.	1.2	0.25	0.35

Mechanische Gütewerte

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Impact Energy (J) ISO-V	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	RT	Hardness
As Welded	360	550	25	60	HRc

Kennblatt

Leistungserklärung

Konformitätserklärung

Kennblatt

Bitte um Angebot

NILO Alloy 36 Mig welding wire

Haftungsausschluss

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.