Alloy 188 Tig | Certilas: The filler metal specialist

Zurück

Produktspezifikationen
Verpackung
Bitte um Angebot

Type

GTAW filler metal for welding Alloy 188

Anwendungen

Alloy 188 combines properties which make it suitable for a variety of fabricated component applications in the aerospace industry. It is widely used in established military and commercial gas turbine engines for combustion cans, transitions ducts, and afterburner components.

Type

GTAW filler metal for welding Alloy 188

Anwendungen

Alloy 188 combines properties which make it suitable for a variety of fabricated component applications in the aerospace industry. It is widely used in established military and commercial gas turbine engines for combustion cans, transitions ducts, and afterburner components.

Eigenschaften

Alloy 188 Tig filler metal is used for welding of 188 alloy. The alloy has excellent strength with superior oxidation resistance and thermal stability. The alloy has good sulfidation resistance and is used extensively in demanding military and civil aircraft gas turbine engine combustors and other key components.

Geeignet für

Alloy 188

Schweißpositionen

Rücktrocknung

Not required

Gas acc. EN ISO 14175

I1

Analyse

Co	Cr	Ni	W	Fe	Mn	Si	C
Rem.	22	22	15	2	0.9	0.35	0.1

Mechanische Gütewerte

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded		791	39	HRc

Kennblatt

Leistungserklärung

Konformitätserklärung

Kennblatt

Bitte um Angebot

Certilas

Certilas

Haftungsausschluss

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.