AA C-276 | Certilas: The filler metal specialist

Zurück

Produktspezifikationen
Verpackung
Bitte um Angebot

Type

Rutile flux-cored nickel based welding wire for gas shielded arc welding.

Due to high molybdenum content this alloy offers excellent resistance to stress & corrosion cracking, pitting and crevice corrosion. High mechanical properties with excellent weldability due to improved wetting compare to solid wire.

140°C / 24 hr

classification

AWS

A 5.34: E NiCrMo4T1-4

EN ISO

12153-A: T Ni 6276 (NiCr15Mo15Fe6W4) P M21 2

W.Nr.

2.4886

Anwendungen

AA C-276 is used for welding materials of similar composition. This low carbon nickel-chromium-molybdenum filler metal can also be used for dissimilar welding between nickel base alloys and super austenitic stainless steels, as well as for surfacing and cladding on low alloyed steels.

Type

Rutile flux-cored nickel based welding wire for gas shielded arc welding.

Anwendungen

AA C-276 is used for welding materials of similar composition. This low carbon nickel-chromium-molybdenum filler metal can also be used for dissimilar welding between nickel base alloys and super austenitic stainless steels, as well as for surfacing and cladding on low alloyed steels.

Eigenschaften

Due to high molybdenum content this alloy offers excellent resistance to stress & corrosion cracking, pitting and crevice corrosion. High mechanical properties with excellent weldability due to improved wetting compare to solid wire.

Klassifikation

AWS

A 5.34: E NiCrMo4T1-4

EN ISO

12153-A: T Ni 6276 (NiCr15Mo15Fe6W4) P M21 2

F-nr

43

FM

5

W.Nr.

2.4886

Geeignet für

Alloy 276, Ni 6276 (NiCr15Mo16Fe6W4). 2.4886, 2.4887

M.No: 1.5680, 1.5682, 2.4819, 2.4883

NiMo16Cr15W, X12Ni5 / 12Ni19, X8Ni9, G-NiMo16Cr

Alloy C4, Hastelloy C276, A494CW-12MW, A743 / A744CW-12M

Schweißpositionen

Rücktrocknung

140°C / 24 hr

Gas acc. EN ISO 14175

M21

Analyse

C	Si	Mn	Cr	Ni	Mo	Nb	Ti	V	Fe	W	Co	Cu	Al	P	S
0.018	0.16	0.75	15.5	58	16				6	3.5				0.015	0.015

Mechanische Gütewerte

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Impact Energy (J) ISO-V		Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	-100°C	-196°C	Hardness
As Welded	450	750	48	60	55	HRc

Kennblatt

Leistungserklärung

Konformitätserklärung

SDB

Kennblatt

Bitte um Angebot

SDB

C276 AA C-276 fluxcored welding wire for hasteloy

Haftungsausschluss

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.