WEARtig Co 1

Hersteller
UTP
Ceweld product
Type
Cobalt-based fluxcored wire with high abrasion and corrosion resistance.

CEWELD AA DUR 1 deposits a cobalt-base alloy with an austenitic-ledeburitic structure. This is the hardest of the standard cobalt-base alloys. It has a high resistance to corrosion (especially to reducing acids and impact), extreme wear and temperature shocks. The alloy is only machinable by grinding. Best used on wear pads, rotary seal rings, pump sleeves and centerless grinder work rests.

140°C / 24 hr

classification
AWS
A 5.21: ERCoCr-C
EN ISO
14700: T Co2
DIN
8555: MSG 20-GF-55-CTZ
Anwendungen

Pump sleeves, expeller srews, plastic recycling, mixer blades for rubber, valves, seats etc..

Type
Cobalt-based fluxcored wire with high abrasion and corrosion resistance.
Anwendungen

Pump sleeves, expeller srews, plastic recycling, mixer blades for rubber, valves, seats etc..

Eigenschaften

CEWELD AA DUR 1 deposits a cobalt-base alloy with an austenitic-ledeburitic structure. This is the hardest of the standard cobalt-base alloys. It has a high resistance to corrosion (especially to reducing acids and impact), extreme wear and temperature shocks. The alloy is only machinable by grinding. Best used on wear pads, rotary seal rings, pump sleeves and centerless grinder work rests.

Classification
AWS
A 5.21: ERCoCr-C
EN ISO
14700: T Co2
F-nr
71
DIN
8555: MSG 20-GF-55-CTZ
Geeignet für

ER CoCr-C  / Co3

Stellite 1

Schweißpositionen
PA
PB
PC
Rücktrocknung

140°C / 24 hr

Gas acc. EN ISO 14175
M13
Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
2.5 1 0.1 29 0.002 3 11 Rem.
Mechanische Gütewerte
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 53 HRc
Product sheet
MSDS
product sheet
Ask quotation
MSDS